Dmax EasySearch, Инструкция по эксплуатации

Страница: 19 / 24

19 / 24
4. Place the three objects on the floor, maintaining sufficient distance
5. Swing the search coil slowly over each object.
6. Try different search modes to filter out unwanted items
13 Exact localization of the object
An exact localization of the object facilitates the subsequent excavation work.
1. Always start with a low sensitivity. Increase sensitivity only when you are more familiar with the
device.
2. If the device detects a buried metal object, perform an approaching pivot movement.
3. Mark the place of discovery.
4. Perform drawing an "X" movement above the place of discovery.
14 Search coil movement
right
wrong
1. Keep the search coil always level with the ground
2. Slowly perform half-circle movements.
3. As soon as a metal is detected, a beep sounds and the metal type is shown in the display.
4. To ensure proper detection, always perform multiple swings, so that no objects are overlooked.
15 Beep tones
The device has three beep tones which indicate the type of the buried object. These tones correspond
to the three categories displayed on the LCD display.
IRON MID RANGE SILVER / COPPER
Low tone
Iron or ferrous objects will re-
port here.
Medium tone
Pull-tabs, zinc, small bass ob-
jects, some bottle caps will report
here.
High tone
Silver and copper coins, big brass
coins, 25¢, 10¢ (1982 or earlier)
and other precious coins.
16 LED Identification
1. The red LED lights up if ferrous targets are detected.
2. The blue LED lights up if non-ferrous targets are detected.