DLoG MTC 6, Руководство пользователя

Страница: 77 / 89

Internal devices
DLoG MTC 6 User’s Manual V1.00 67
12.5. Automatic switch-off
The DLoG MTC 6 is equipped with an automatic switch-off module.
Modes of operation
If wired up accordingly, the DLoG MTC 6 conveniently switches off together with the
vehicle’s ignition.
As disconnecting the power supply during operation can lead to data loss, the operating
system needs to be shut down normally using the appropriate hardware and software
installed on the system when the ignition is switched off.
The DLoG MTC 6 is connected to the vehicle with three supply cables . DC+ und DC- are
directly connected to the power supply of the vehicle, the connection is of course run
through fuses.
Therefore make sure that the cables are connected directly to the battery and not to high-
interference supply lines (for example, motor supply) or to supply lines already used by
other consumers.
The supply voltage connected is then linked to the DLoG MTC 6’s ignition input via a
switch, for example, the key switch of the ignition (also with a fuse).