DLoG ITC 7, Руководство пользователя

Страница: 42 / 94

Accessories
30 User’s Manual DLoG ITC 7
6. Accessories
6.1. Keyboard
On the DLoG ITC 7 any keyboard with a 6-pin Mini-DIN plug can be connected (PS/2).
Resources for the keyboard controller are pre-defined in the system architecture and
automatically managed by the BIOS.
All keyboards can be used with all operating systems. No additional drivers are required.
6.2. Mouse
Any PS/2-compatible mouse with a standard Mini-DIN plug, USB connector or RS-232
port can be connected to the DLoG ITC 7. If the mouse has a PS/2 connection, a Y cable
is also required.
6.2.1. Touch operation and mouse
It is not possible to use a PS/2 mouse during Touch operations, if you use the touch
controller in PS/2 mode. By default, however, the touch controller is operated via COM4.
Of course a USB mouse or a RS-232-mouse can always be used in combination with
touch mode.
Resources
Resources for the PS/2 mouse controller are pre-defined in the system architecture and
automatically managed by the BIOS. This is also the case for RS-232 and USB mouse
devices.
Drivers for MS-DOS operation need to be supplied by the control device manufacturer
(order if necessary).
Support for the USB mouse under MS-DOS can be provided with a PS/2 driver, since
here it is managed by the BIOS.
Special functions, such as those provided by wheel mouse devices, frequently require
additional drivers, which are to be supplied by the manufacturer.