2
SAFETY INSTRUCTIONS
CAUTION:
Besides following the instructions mentioned in this manual, when using electric equipment you must always
observe all safety precautions to prevent risk of fire, electric shock and personal injury.
Read this instruction manual before use and keep it carefully.
As with all power tools there is a certain amount of hazard involved with the operator and his use of the tool.
Using the tool with respect and caution demanded as far as safety precautions are concerned will considerably
lessen the possibility of personal injury. However, if normal safety precautions are overlooked or completely
ignored, personal injury to the operator can develop. There are also certain applications for which this tool was
designed. We strongly recommend that this tool NOT be modified and/or used for any application other than for
which it was designed. If you have any questions relative to its application DO NOT use the tool until you have
written to us and we have advised you.
This tool has been designed for specific purposes. We recommend you not to modify it or use it for purposes
different from the ones for which it has been manufactured. If you have any doubts regarding specific
applications, do not use the machine before having contacted us and received our instructions.
GENERAL SAFETY INSTRUCTIONS
1.
Keep the work surface clean.
If the work area or surface is busy the probability of injuries is higher.
2.
Do not use
the machine in dangerous environment conditions. In order to prevent electric shock,
do not
expose the machine
to rain and do not use it in a damp area. Keep the work area illuminated.
Do not use the
machine
near gas or inflammable substances.
3.
Connect
the dust collection device. If the machine is provided with a dust collection device, make sure that
this system is connected and correctly used.
4.
Keep
unknown persons and children away from the machine. All unknown persons and children must keep
a safe distance from the work area.
5.
Protect yourself
from electric shock. Avoid any contact with earthing surfaces.
6.
Handle
the power supply cable with care.
Do not pull
the electric cable to disconnect it from the plug. Keep
the electric cable away from heat, oil and sharp edges.
7.
Use
extension cables designed for outdoor use. When using the machine outdoors, use only extension
cables suitable for outdoor use, having specific indications.
8.
Be vigilant
. Check carefully what you are doing, have good sense. Do not use the machine if you are tired.
9.
Do not use
the machine if you are having taken medicines, alcohol, drugs.
10.
Avoid
accidental starts. Be sure that the switch is on the OFF position before inserting the plug into the
socket.
11.
Wear appropriate clothing
. Do not wear loose-sleeved garments or pieces of jewelry which may get
caught in the moving parts. For outdoor use we recommend non-slip shoes. Use headgear to cover hair if
necessary.
12.
Use always personal protection devices:
wear protective goggles and masks in case dust or sawdust is
produced. Wear ear muffs or plugs in noisy areas. Wear gloves when handling parts with sharp edges.
13.
Do not be off balance
over the machine. Always keep stand firmly.
14.
Ask
for advices to expert and qualified people if you are not familiar with using such a machine.
15.
Remove
the tools you do not use from the workbench. If you do not use the tools, you must arrange them in
a dry area which is locked and away from the reach of children.
16.
Do not force
the tool. It will do the job better and be safer at the rate which it was designed.
