![DKSH ST-250 BDS Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/dksh/st-250-bds/st-250-bds_operators-manual_2512806014.webp)
14
-
Unplug the sander
-
Wait for all moving parts to stop.
BEFORE LEAVING THE SANDER:
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don’t leave tool until it comes to a
completed stop.
MAKE WORKSHOP CHILDREN PROOF. Lock the shop. Disconnect master switches.
BEVEL SANDING
The work table can be tilted from 0° to 45° for bevel sanding. Loosen the table lock knob and tilt the worktable to
desired angle as shown. Retighten table lock knob.
Warning:
To avoid trapping the work or fingers between the table and sanding surface, the table should
repositioned on the table support to retain a maximum of 2mm distance between sanding surface and table.
POSITIONING BELT BED
A bed locking hex socket head screw locks the belt bed in a vertical or horizontal position.
To adjust vertical position:
1.
Remove the work support.
2.
Loosen the hex socket head locking screw using a 6 mm hex wrench.
3.
Position belt bed vertically as shown and tighten the hex socket head locking screw.