DKS HSG-G122, Инструкция по установке, эксплуатации и использованию

Страница: 10 / 20

NOTES
-
Cable through the electrical box with the dome base
The housing can also be mounted on a 4s or 2s electrical box.
-
Using the conduit knockout punched with the dome base
Remove the conduit knockout punched for the cable entry.
Figure 3. Mount electric box
Heater Kit Installation (Optional)
1. Place the heater element is sl ot “A”. Pl ease ensure that the cables are facing upwards and the heater is
pointing towards the Dome.
2. Place the PCB in slot “B”. Please ensure that the PCB is facing inside of the Dome with the connection
blocks at the top.
3. Place the plug in the Socket “C” (J3) which is found on the controller board.
Figure 4. Heater Kit Installation
NOTES
- Heater power consumption
Power Supply AC24V DC12V
Power Consumption 20Watt 10Watt
Heater On at 41°F (5°C)
Heater Off at 59°F (15°C)
-
Use Certified/Listed Class 2 power source only.
9