DKS HSG-G122, Инструкция по установке, эксплуатации и использованию

Страница: 11 / 20

CAMERA INSTALLATION
Connection Overview
10
Starting Installation
1. Install the Lens
Field of view
: Adjust setting
from Telephoto (T) to wide (W)
field of View.
Focus
: Adjust lens focus from
near (N) to infinity.
- Be careful the lens does not touch camera sensor when installer try to enter the lens into camera.
2. Mount the camera
The camera can be mounted from bottom side.
3. Connect other peripheral devices
3-1.Connect the other peripheral devices such as Alarm, D&N IN and BNC connector.
3-2.Coaxial Cable
is connected to
the HD-SDI camera and the Converter
3-3.The HDMI Cable is connected to the Converter and the FULL HD Monitor .
4. Supply the camera with power.
- Connect DC12V or AC24V wires to the camera power connector. Be careful when DC12V wiring especially the direction
of positive and negative. Use power supply compatible with FCC Class2.
- The camera will complete a configuration processing within approximately 4~5 seconds.
5. View the camera image
CAMERA OVERVIEW
A. Up
B. Right
C. Down
D. Left
E. Enter
F. Spot Video Output
F