DKS HSG-G122, Инструкция по установке, эксплуатации и использованию

Страница: 14 / 20

CAMERA OPERATION
Main Menu
Click Button on the OSD control Window.
The camera setting menu appears on the view picture
CAMERA SETTING
▶ CAMERA ID OFF
EXPOSURE ALC
WHITE BAL ATW
DAY/NIGHT AUTO
MOTION DET OFF
3D-DNR HIGH
PRIVACY OFF
SPECIAL
◄
RESET
◄
EXIT
◄
Use up or down button to select an option the push button. submenu appears.
use up or down button to select a submenu option
Use right or left button to select a value.
Select <exit> option then push enter button to exit the setup menu, In the
Submenu, use right or left button to select a mode and push enter button
To exit the setup menu
RET : return to the previous.
TOP : return to camera setting menu screen
END : exit the setup menu
<Exposure setting>
Exposure is the amount of light detected by the camera sensor. A scene with correct exposure settings has adequate
detail and contrast between white and dark values. An image with too little or too much exposure determines detail in
the scene. The camera features auto and manual exposure settings.
Exposure mode:
Supports exposure modes to control the amount of light detected by the camera sensor base on
settings for light conditions. The default setting is ALC.
-- ALC: Automatic Light Control for indoor scenes.
-- ELC: Electronic Light Control for outdoor scenes.
-WDR/BLC : Use WDR/BLC option to view the object clearly in backlight condition.
- WDR: Wide Dynamic Range feature can be very helpful to cope with very challenging lighting conditions. It is
capable of capturing both of the dark part and bright part and combining the differences into a scene to
generate a highly realistic image as original scene.
-- BLC: Back Light Compensation feature helps to alleviate the issues of visibility in high contrast area.
-- HSBLC: Highlight Suppression Back Light Compensation.
-Brightness: The image brightness can be adjusted in the range 0-20, where a higher value produces a brighter
image.
-AGC:
Select an AGC level according to Mode selection.
NOTE
If you set [AGC] to OFF, then the [Day and Night Auto], [SENS-UP] and [3D-DNR] are not available.
- Shutter speed:
Select a Shutter speed option.
--
X64 to X2:
Set to the slow shutter.
--
Auto:
Adjust the shutter speed automatically.
--
Off:
Fix to the shutter speed.
--
AntiFlk:
Set the shutter to anti-flick mode.
-- 1/160 to 1/10000:
Set to the fast shutter.
13