1834-065-B-10-14
37
1.
Press and enter your four-digit MASTER CODE (
beep
).
2.
Enter the existing
directory code
(section 3.5.2 or 3.5.4) that the name will be assigned to (1, 2, 3 or 4 digits, section 3.5.1),
then press (
beep
).
3.
Enter the residents name, one character at a time, press (
beep
) after each character to enter it. Continue entering
characters, pressing (
beep
)
after each character
until all characters have been entered.
The LCD display will display each character after
*
is pressed.
Refer to 3.4.1 and 3.5 for reference to letters, spaces etc.
4.
Press (
beep
) to enter the complete name.
The LCD display will go blank after
*
has been pressed.
3.
Repeat steps 2, 3, and 4 to enter additional names.
5.
Press together to end this programming sequence (
beeeeeep
).
In this section, names will be programmed into the system. Names are referenced to a phone number by entering the directory
code that the person’s phone number has been programmed to.
3.5.5 Programming Names
??
??
??
??
66
MNO
MNO
66
MNO
MNO
This programming sequence is used to delete a single phone number under a
known directory code
. Proceed to 3.5.7 to delete
the resident name after deleting the phone number.
3.5.6 Deleting Individual Phone Numbers
1.
Press and enter your four-digit MASTER CODE (
beep
).
2.
Enter the existing
directory code
(section 3.5.2 or 3.5.4) that the phone number has been assigned to (1, 2, 3 or 4 digits,
section 3.5.1), then press (
beep
).
3.
Press , then press (
beep
).
4.
Repeat steps 2 and 3 to delete additional phone numbers.
5.
Press together to end this programming sequence (
beeeeeep
).
??
??
??
??
11
SP
SP
00
OPER
OPER
00
OPER
OPER
This programming sequence is used to delete a resident name from the directory. These steps
WILL NOT
erase the resident
telephone number from the system. Go to section 3.5.6 above to delete the resident telephone number.
3.5.7 Delete Names
1.
Press and enter your four-digit MASTER CODE (
beep
).
2.
Use the A and Z buttons to locate the name that is to be erased on the LCD screen, then press (
beep
).
3.
Repeat step 2 to erase additional names.
4.
Press together to end this programming sequence (
beeeeeep
).
??
??
??
??
55
JKL
JKL
66
MNO
MNO
00
OPER
OPER
00
OPER
OPER
Содержание 1834
Страница 2: ......
