DK-1100A Ink Roll Coder
Operation Manual
3.2.3 Relocating the Pressure between the Ink Roll and Types
IMPORTANT: Poor pressure between the ink roll and types can result in un-clear or missed prints.
1- Use the 6mm Allen wrench to take out the Allen screw in the body of print head.
2- Loose the inside M5 Allen screws.
3- Take the ink roll out, rotate the ink roll shaft manually to relocate the space between ink roll shaft and
ink roll (the ink roll shaft is eccentric).
4- Put in the ink roll to check whether the pressure is correct; if not, repeat step 3 & 4 till the pressure is
correct.
5- Tight the M5 Allen screw.
6- Reset the M8 Allen screw.
3.3 Change Date Numbers
3.4 Change the Hot Ink Roll
1-
Install the type on the pins of the type holder. Secure the type to the type holder pins with the
type stoppers. Two type styles are available, depending on which way the print is oriented on
the web- radial (for printing with the web), and axial (for printing across the web).
2-
Align
the
type
holder to
the
type holder
shaft.
Push
the type
holder
into the
head and
turn until it seats into place.
Follow the following instructions step by step:
1-
Press an ink roll arbor into the ink roll.
2-
Slide the ink roll arbor and ink roll on the inking shaft until it seats into place.
IMPORTANT:
The PREHEATER
is an optional
part to preheat the
ink roll
and reduce the
stand-by time
of the production line.
SHANGHAI DIKAI SEPARATE MACHINERY CO., LTD.
SHANGHAI DIKAI SEPARATE MACHINERY CO., LTD.
3-18
3-18
