dji MATRICE 200 series, Руководство пользователя

Страница: 22 / 140

22
© 2018 DJI All Rights Reserved.
MATRICE 200 Series
User Manual
The aircraft can sense and avoid obstacles when the Forward Vision System is enabled and
MJHIUJOHDPOEJUJPOTBSFTVGmDJFOU5IFBJSDSBGUXJMMBVUPNBUJDBMMZBTDFOEUPBWPJEPCTUBDMFTBOE
descend slowly as it returns to the home point. To ensure the aircraft returns home while facing
GPSXBSEJUDBOOPUSPUBUFPSnZMFGUBOESJHIUEVSJOH35)XIJMFUIF'PSXBSE7JTJPO4ZTUFNJT
enabled.
Smart RTH
Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and
follow the on-screen instructions when GPS is available to initiate Smart RTH. The aircraft will
then automatically return to the last recorded Home Point. Use the remote controller to control the
aircraft’s speed or altitude to avoid a collision during the Smart RTH process. As the aircraft returns,
it will use the primary camera to identify obstacles as far as 300m in front, allowing it to plan a safe
route home. Press and hold the Smart RTH button once to start the process, and press the Smart
RTH button again to terminate the procedure and regain full control of the aircraft.
Low Battery RTH (Can be turned off in DJI GO 4 app)
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point
that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft
immediately when prompted. The DJI GO 4 app will display a notice when a low battery warning
is triggered. The aircraft will automatically return to the Home Point if no action is taken after a ten-
second countdown. The user can cancel the RTH procedure by pressing the RTH button on the
remote controller. The thresholds for these warnings are automatically determined based on the
aircraft’s current altitude and distance from the Home Point. If the RTH procedure is cancelled
following a low battery level warning the Intelligent Flight Battery may not have enough charge for
the aircraft to land safely, which may lead to the aircraft crashing or being lost.
The aircraft will land automatically if the current battery level can only support the aircraft long
enough to descend from its current altitude. The user can still use the remote controller to alter the
aircraft’s orientation during the landing process.
The Battery Level Indicator is displayed in the DJI GO 4 app, and is described below:
12:29
3FNBJOJOHnJHIUUJNF
4VGmDJFOUCBUUFSZ
level (Green)
Battery level Indicator
Power required
to return home
Critical Low battery level
warning (Red)
Low battery
level warning (Yellow)
H