Dixie Narco DNCB 168, Руководство по обслуживанию и устранению неисправностей

Страница: 20 / 85

Note: If "UN-0", the promotion is disabled.
Press & hold Select Button 2: The number of free beverages to be delivered after the number of
vends have occurred will increment from zero to 25 and then return
to zero. Release the select button when the desired number of free
beverages to be delivered is displayed.
Note: If "FR-O", the promotion is disabled.
Press & hold Select Button 3: Display will show "ENABLED SEL # (s) where # shows the
selections that are enabled for the promotion to occur.
To add or delete selections:
A) Press the service switch. The display will show "ADD", indicating selections will be added.
Press the service switch again and the display will show "DEL", indicating selections will be
deleted.
B) Press and hold any select button. The display will show "ADD #" or "DEL #", where # is a
select button number. While holding a select button, the # will increment from 1 to the
maximum select button number and return to 1.
C) Release the select button when the desired selection # to be added or deleted is displayed.
A message will scroll across the display, telling you what selection will be added or deleted.
D) Press the service switch to complete the decision.
NOTE: Only one selection may be added or deleted at a time. The service switch must be pressed before and
after each change.
Important: Promotional sales, when enabled, will be on at all times of the day.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
ECNT - ELECTRONIC COUNTER
This function is used to show historical total vends, historical product counts that have occurred for prices being used,
and interval product count for each selection from outside the vender. To program the SIID to use this function, press
any select button. The current setting or four (4) key programming will be displayed. If "----" no code is programmed.
To program or to change four (4) key program:
A) Press service switch. Display will show "----", indicating the new code is ready to be entered.
B) Press the four (4) select buttons that are desired to be in the code. As they are pressed, the display will
change to show the four (4) select buttons chosen. Note: Four (4) separate buttons must be used or the
pattern will not be saved. Note: Only select buttons 1 through 9 may be used.
C) Press the service switch. The display will change back to "ECNT".
To show the current count, hold the four keys programmed for five (5) seconds. The display will show historical total
vends.
To view other data:
Press & hold Select Button 1: Show historical total vends.
Press & hold Select Button 2: Show list of prices and historical product counts that have occurred for
those prices.
Press & hold Select Button 3: Show interval product count for each selection.
Press & hold Select Button 4 for five seconds: Resets interval data. "COUNTERS RESET" will scroll
across display.
Press any select button greater than 4 will return the vender to normal operation.
Note: There is a two (2) minute time-out that will return the vender to normal vending mode.
Press & hold select buttons 1 & 2 simultaneously to move to the next item on the menu.
NF - NOTE FACTOR (for use with foreign note acceptors only)
Will only be present in menu if SET BILLS ONLY is programmed to "BILLS YES".