Digital Video Recorder User Manual
32
Fig 4.22 Motion
Step 2:
Enable motion alarm and set alarm hold time which means time interval between two adjacent detective
motions. If there is other motion detected during the interval period, this is considered continuous movement.
Otherwise, it will be considered that those two adjacent detective motions are two different motion events.
Click Trigger button to pop up a dialog box.
Step 3:
The setup steps of motion trigger are similar with alarm handling. User can refer to “Chapter 4.5.1 Sensor
Alarm Handling” for more details.
Step 4:
Click Area button to pop-up a window like in Fig 4.23.
Fig 4.23 Motion - Area
Step 5:
In the Area interface, user can drag slide bar to set the sensitivity value (1-8). The default value is 4. The
higher the value is the higher sensitivity you get. Due to sensitivity being influenced by color and time (day or
night), user can adjust its value according to the practical conditions. Click
icon, set the whole area as
detection area. Click
icon, the set detection area will be cleared. Click
icon, user can test whether the
sensitivity value and motion area are suitable accordingly (refer to the following picture). Click
icon, to
save the setting. Click
icon, exit current interface.
