Digital Video Recorder User Manual
30
②
Alarm handling
Step 1:
Enter into system configuration
alarm configuration
sensor
alarm handling. Refer to Fig 4.19.
Step 2:
Select hold time and click Trigger button. Then a dialog box will pop-up as Fig 4.20.
Fig 4.19 Alarm Configuration - Sensor - Alarm Handling
Fig 4.20 Alarm Handling - Trigger
Step 3:
After selecting Buzzer, there will be triggered buzzer alarm out.
Full screen alarm:
When triggered alarm, an alarm full screen will pop up.
Email:
Tick off this function. When an alarm is triggered, a notification email will be sent to user’s designed email box
including trigger events, time, snap pictures, device name, ID camera name etc.
Snap:
Select channels. When an alarm is triggered, the system will automatically save the captured pictures from the
selected channel. If user ticks off Email function, these pictures will also be sent to user’s designed email box.
To alarm out:
When selecting the channel, there will be triggered alarm out in the designated channel. Click OK
button to save the setting and click Exit button to exit the current interface.
To record:
Tick off recording channels. It will record the camera when alarm is triggered. Click OK button to save the
setting and click Exit button to exit the current interface.
To P.T.Z:
Set linked preset and cruise for alarm. User can select any channel and multi channels as linked channels.
Click OK button to save the setting and click Exit button to exit the current interface.
