Dive Gear Express DGX Gears XTRA, Руководство по обслуживанию

Страница: 22 / 32

3. Set this assembly aside and install one of the O-rings (27*) into the groove on the regulator body that
the End Cap/Port Swivel assembly screws onto – Fig. 32. Use the Piston Stem Bushing Assembly Tool
and on the narrower end place in the following order the Washer (28), lubricated O-ring (27*), and Teflon
Washer (26*) – Fig. 33.
Fig. 32 Fig. 33
4. Next, lubricate the O-ring (15*) and install it on the Piston (14) - Fig. 34. Place the Washer (12-1*)
on the Piston, followed by the Spring (13) - Fig. 35, and the Washer (12*) - Fig. 36.
Fig. 34 Fig. 35 Fig. 36