6. Holding the Lever upright, use a thin wooden dowel to push the assembly consisting of the LP Seat
(21*), Piston (22), O-rings (23*), Main Spring (24), and Balance Cylinder (25) out of the Adjust Tube. You
may hear a slight click as you do this when the LP Seat end passes the Lever. Remove the Lever from
the Adjust Tube - Fig. 15.
An alternative method is to carefully remove the Lever by lifting one leg out
of the hole and rotating the Adjust Tube to allow the other side to come out - Fig 16. DO NOT BEND
THE LEGS OF THE LEVER TO DO THIS.
Fig. 15 Fig. 16
7. Remove the LP Seat from the Piston. Pull the Piston and Main Spring out of the Balance Cylinder and
remove the O-rings (23*) from the Piston - Fig. 17.
Fig. 17
Содержание DGX Gears D6
Страница 1: ...DGX Gears D6 Second Stage Service Manual...
Страница 32: ......