Settings
Alm Setup
Alm on
Beep off
Restore
Exit
*
2
24
2
2
2
2
2
Fig. 7
To switch off the alarm function, proceed similarly
and set the function from on to off. To save the
selected settings, move the star-shaped cursor to
the Exit entry by pressing the configuration button
and hold down the button until the
measurements are displayed again. The selected
settings are now saved.
If the alarm function is activated, an acoustic or
visual alarm is triggered if the values go above or
below adjustable upper or lower limits. To activate
this, switch on the device and hold down the M
configuration button until the Settings/Alm
Setup mode is displayed and release the button
. The star-shaped cursor is now displayed next
to Alm Setup. Briefly press the M configu-
ration button to move it to the Alm entry. Next to
the star-shaped cursor, off is displayed (this
means that the alarm function is deactivated).
When you hold down the M configuration
button, the setting alternates between on and off.
Switch on the alarm function by releasing the
configuration button when on is displayed (refer to
fig. 7).
8.2 Activation/deactivation of the
alarm function
APPLICATION
GB
