1706K39C
Page 5 of 26
Parameter 4: Display configuration: This parameter configures the time sync depending on the capabilities
and the user desires. If the user selects a sync not allowed by capabilities, the display will not sync. For
example, a display without Ethernet connection, selecting SNTP sync will have no effect. Options are:
0. Do not sync.
1. Sync with another display through Ethernet.
2. Sync through SNTP.
3. Sync with another display through RS-485.
4. Sync through GPS.
Parameter 5: Display power-up time: This parameter configures the time the display changes form power-
.save mode to full-operative mode. When accessing in this parameter, the hour the display changes to full-
operative mode is shown. When the Enter key is pressed, the minutes are shown. To go back to the
parameter menu, press the Enter key again.
Parameter 6: Display power-down time: This parameter configures the time the display changes from full-
operative mode to power-save mode. When accessing in this parameter, the hour the display changes to
power-save mode is shown. When the Enter key is pressed, the minutes are shown. To go back to the
parameter menu, press the Enter key again.
Parameter 7: Website language. This parameter is shown if the display includes Ethernet option.
0 - Catalan
1 - Spanish
2 - English
3
– French
4 - German
Parameter 8: Display IP. This parameter is shown if the display includes Ethernet option. This
parameter allows the user to change the IP address of the display. Access this parameter pressing the
Advance key. Once inside, the first number of the IP address is shown. Modify it using the Increase and
Advance keys and validate it using the Enter key. Do the same with the other 3 numbers of the IP address. To
identify each number, think that the first number is shown without decimal point. Next numbers appear with
decimal points, shifting left each number.
