ENG
DEU
28
Commissioning
ENG
5. The device will be displayed automatically in the app.
6. For confirmation of the teach-in process, enter the last four digits of the device
number (SGTIN) in the app or scan the supplied QR code. The device number
can be found on the back side of the device.
The LED will light up in green after a successful teach-in process. The pro-
cess must be repeated if the LED lights up in red.
9
The function test starts.
The function test starts for a duration of 10 minutes after a successful teach-
in process. When the PIR lens detects a movement, the device LED lights
up. This allows a direct test of detection range and sensitivity. When the
time has elapsed, the device changes to the individually set configuration.
7. Put on and rotate the battery compartment cover until it clicks into place.
8.
Follow the directions of the DITECH Smart Home iL app
5.2 Installation
The motion sensor is intended for wall or ceiling installation. The supplied wall-
mount support must be used for wall installation. A suitable installation place must
be chosen prior to mounting.
