DITECH DT5639, Инструкция по эксплуатации

Страница: 42 / 60

Commissioning
42
ENG
DEU
ENG
5.1.2 Teach-in to DITECH Smart Home iL central unit
For a control via the DITECH Smart Home iL App, the teaching-in must of the DT5637
must be performed via the central unit (DT5637). Teach-in the device as follows:
Ö The DITECH Smart Home iL central unit has been set up via the DITECH Smart
Home iL app (see instructions DT5637).
1. Open the DITECH Smart Home iL app on the smart phone.
2. Select the menu item
Teach-in device .
3. Pull the room control unit Display from the interchangeable frame (see fig. 5
page 4).
4. Pull out the insulating strip from the battery compartment, or insert batteries.
If Batteries are inserted, shortly press the system key (D) in order to activate the
teach-in mode.
5. The device is displayed automatically in the DITECH Smart Home iL app.
6. Enter the last four ciphers of the device number (SGTIN) or scan the supplied QR
code for confirmation. The device number can be found below the QR code or
in the battery compartment.
The LED will light up in green after a successful teach-in process. If the LED
lights up red, repeat the process.
7. Follow the instructions in the app.