ASSEMBLY INSTRUCTIONS
SEG LIGHTBOX - FABRIC BACKLIT DISPLAY
5. Install flat panel feet on the bottom of the frame. Insert the back thumb screw at one corner into the slot in the foot panel
through the pre-cut hole. Slide the foot to the front so the thumb screw goes in, and the other thumb screw falls into the round
hole. Repeat this step to install another foot. Adjust both feet to make the frame stable.
6. Assemble the SEG fabric onto the front and back of the frame by inserting silicon edge into the slot. Be sure the fabric is
fully stretched. Plug the power cord to light up the LED panel. The SEG lightbox is ready to use.
Disclaimer: For additional support or to see assembly in action, visit www.displays2go.com for a how-to video!
3 of 3
