ASSEMBLY INSTRUCTIONS
SEG LIGHTBOX - FABRIC BACKLIT DISPLAY
3. Place the LED light on a clean surface, and carefully roll out the LED ladder panel. Find the “UP” and “DOWN” stickers on
light bars, which go into the top and bottom of the frame respectively.
The green arrow sticker indicates which LED bar and the location on the LED bar is locked in white plastic clip.
4. Connect the power adapter with the power cord at the bottom of the LED panel.
2 of 3
C
D
LEFT RIGHT
LEFT RIGHT
Tips:
(1). Lay the whole frame on the ground if the top of the
expanded frame is hard to reach.
(2). Push the semicircle shaped tab on plastic bracket to
open the clip wider when insert the LED light bar, so the
light bar can be clipped on easily.
(3). When disassambling the LED ladder, push the plastic
tab to remove the LED light bar.
SEMICIRCLE
TAB
C
C
D
D
