disperator EXCELLENT 500A-MB Series, Руководство пользователя

Страница: 17 / 41

User manual in Original
Doc. ref: 500A_MB_am_en_210602
DISPERATOR AB
Tel: 08-724 0160 E-mail: info@disperator.se
Mälarvägen 9, 141 71 Segeltorp Web page: www.disperator.se
17 / 41
16 / 41
6. Installation Description for the Machine
6.1. Assembly of the Machine
6.1.1. Deployment of the Machine
Unless otherwise requested in your order, the machine is delivered with the legs on a pallet. To
minimize the risk of injury, at least two people must be present when the machine is deployed.
The machine has a net weight according to section 3.2 above, so the lifting equipment (eg
forklifts, pallet lifts, lifting trolleys, lifting devices, etc.) to be used must be checked that it can
handle this weight.
Lift the machine off the pallet. Carefully then move the machine to the designated installation
site.
Before lowering the machine to the floor, adjust the four adjustable legs so that the desired
machine height is obtained. To do this, loosen the four locknuts on the machine legs. When the
machine is placed on the floor, check with a spirit level that it is horizontal, and readjust the legs
if necessary. When this is done, tighten the lock nuts on the four machine legs again.
6.1.2. Fixation of the Machine
The machine must be fixed so that during jamming and a quick stop (for example if a cutlery
accidentally ends up in the machine) it is not disturbed from its position due to the torque of the
disposer motor. This can cause unwanted forces on the machine’s connection to the drain pipe
(see section 6.3 below) which can cause leakage. If separate fittings can not be arranged for this
fixing of the machine, there is an optional anti torque bar for delivery from Disperator for fixing
the machine to the longitudinal wall (or corner wall). See section 5.2 above.
For marine installation, the machine is instead fixed with the help of, for example, plates that are
welded to the floor, whereupon the machine’s legs are placed and screwed onto these plates
according to the pictures below. The machine legs with feet are included as standard in delivery
for marine installation (see section 3.2 above), while the plates (if they cannot be arranged
locally) can be ordered as an option from Disperator.