16(33)
User manual in Original
Dok. ref: User manual 500A-BS Rev. C
DISPERATOR AB
Tel: +46 8 724 0160
E-mail: [email protected]
Mälarvägen 9, SE-141 71 Segeltorp, Sweden Fax: +46 8 724 6070
Web page: www.disperator.se
6.1.3.
Fixating of Disposer
•
The disposer must be fixed with a torque protection bar fitted to the wall or bulkhead as per the
figure below. When starting or stopping quickly (e.g. if cutlery jams the grinding unit) the torque
of the motor will cause the disposer to turn. This may move the drain pipe/water trap from its
position causing water leakage. The torque protection bar is not included in standard delivery but
is available as an option. If a torque protection bar is not suitable because of the distance to the
bulkhead, weld the feet directly to the floor plate.
Also torque protection clamps for floor plate
mounting are available as option from Disperator, which facilitates service work as no welds
around the legs need to be cut loose.
6.1.4.
Protective Lid Connected to a Safety Interlock Switch
The disposer must have a protective lid over the inlet to comply with Machine Directive and be eligible
for CE-marking. This lid shall be connected to a safety interlock switch.
Torque protection bar
