Dish Network DVR Satellite System, Руководство пользователя

Страница: 83 / 147

Remote Control Setup
75
Operating Other Devices
Switching Between TV and Tuner/Amplifier Volume Control
When the remote control is setup to operate your TV, the VOLUME and MUTE buttons will
adjust your TV volume. To use the remote to adjust the volume of a remote-controllable
audio receiver or amplifier instead of adjusting the TV’s volume, use the steps
To Use a
Tuner or Amplifier’s Volume Control , below. To switch back to control the TV’s volume, use
the steps To Use the TV’s Volume Control .
To Use a Tuner or Amplifier’s Volume Control
Note
: You must first program the tuner or amplifier into the AUX mode of the remote
control to use these steps.
1
Press and hold the AUX button until all the mode buttons are lit, then let it go.
2
Press the POUND (#) button.
3
Press the PLUS side of the VOLUME button.
4
Press 0.
5
Press POUND (#). The AUX button flashes three times.
To confirm the VOLUME buttons are operating the tuner/amplifier’s volume control, press
SAT and then try adjusting the volume. Your tuner/amplifier’s volume should change
rather than your TV’s volume.
To Use the TV’s Volume Control
1 Press and hold the TV button until all the mode buttons are lit, then let it go.
2
Press the POUND (#) button.
Press
POUND (AUX
button flashes
three times)
Press and hold the
AUX Mode button for
four seconds
(AUX flashes)
Press
POUND (TV
button flashes
three times)
Press and hold the
TV Mode button for
four seconds
(TV flashes)