Dish Network Duo ViP 222, Руководство пользователя

Страница: 73 / 143

Remote Controls
65
Controlling Other Components
Checking the Device Codes
Use these steps to find the device code you’ve set for each remote control mode (TV, DVD
or VCR, and AUX)
.
Instructions Additional Information
1
Press and hold the device mode button
until all the other mode buttons light up,
and then release the button. The mode
button flashes.
For example, hold TV until all of the other mode
buttons light. When you let go, TV will flash.
2
Press the POUND (#) button twice.
Watch the mode light to determine your
code. The mode button flashes the
number for each digit of the device
code, with a pause between groups of
flashes. A quick (half) flash is for zero.
For example, if the code is 570, the mode
button flashes five times, pauses, flashes
seven times, pauses, and flashes once quickly.
For AUX mode:
The first group of
flashes tells you what the AUX mode
controls. A quick flash (zero) before the
three-digit code is for a TV, one regular
flash is for a VCR, and two flashes is
for an audio tuner or amplifier.
For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, and flashes once
quickly.
For a satellite receiver programmed in
AUX mode:
The AUX mode button will
flash the same number of times as the
address number.
For example, if the receiver address is 3, the
AUX mode button flashes three times.
For Limited Mode:
If you have
programmed a TV or VCR in Limited
Mode, the device mode button flashes
once at the end of the flash sequence.
For example, if the TV code is 570, the AUX
mode button flashes once quickly (indicating 0
for TV), pauses, flashes five times, pauses,
flashes seven times, pauses, flashes once
quickly, and then flashes once (indicating it is in
Limited Mode).