manualshive.com logo in svg

Discovery Telecom DTT PRI GSM CDMA Ingate, Руководство пользователя, Страница: 56 / 57

Поделиться
Скачать
Discovery Telecom DTT PRI GSM CDMA Ingate Скачать руководство пользователя страница 56

56 / 54

Q.: I've got too many cables with the Multi -Cell, which cables do I really need to use?

A.: There are five connection cables and one power cable, supplied with the Multi -Cell PRI
Gateway package:

RS232/RJ11 (COM) cable for connecting the Multi -Cell to an auxiliary computer (PC).

Two RJ-45 straight cables, one for the Ethernet LAN connection and the other for the ISDN
connection (in case the Multi-Cell is set to TE Network Access).

An Ethernet RJ-45 cross cable used for direct IP connection between the Multi -Cell and a
PC, in order to set the initial IP settings of the Multi-Cell Gateway system.

An E1 RJ-45 cross cable, is used for ISDN connection, in case the Multi -Cell is set to NT
network access mode.

Q.: I've connected the Multi -Cell to my VoIP gateway, but calls aren't going through the
Gateway. How can I resolve this?

A.: Check the connection between the VoIP and the Multi -Cell. The VoIP should be set to m aster
synchronization and NT network access and the Multi -Cell should be set to slave synchronization
and TE network access. Note that the ISDN cable connecting the Multi -Cell and VoIP should be
straight, not cross. Although , check that the calls are sent to the Multi -Cell from VoIP as "voice",
any other setting will result in call rejections.

Q.: I am trying to connect to a Gatekeeper with my VoIP Gateway and I cannot pass call
through it. How can I resolve this?

A.: This is out of this manual scope and we cannot help you w ith that, since it is specific VoIP
equipment. Contact your VoIP equipment support to resolve  this problem.

Содержание DTT PRI GSM CDMA Ingate


























































Отзывы:

Нет отзывов