Discovery Telecom DTT PRI GSM CDMA Ingate Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 57

Discovery Telecom DTT PRI GSM CDMA Ingate Скачать руководство пользователя страница 3

3 / 54

Dear Customer,

We thank you for purchasing our Cellular Multi Cell to ISDN PRI Gateway.

This Gateway is in the GSM technology and will be referred as a cellular Gateway. The
information in this manual does not constitute a warranty of performance, although the

All our products are developed and produced by experienced engineers, who aspire to
achieve customer satisfaction, utility value and reliability of products.

Warranty Policy

The PRI Multi Cell ISDN Cellular Gateway product you have purchased is under warranty
for 1 year from the date of purchase, by the original purchaser. In case of defects of

warranty applies to hardware/software but does not include SIM Cards.

This warranty will not be honored if the device has been mishandled in any way.

We hope you enjoy our product and we will be happy to receive any comments you may
have. This will enable us t o improve our products and the t echnical support that we give to
every customer.

information has been compiled and checked for accuracy by Discovery Telecom Ltd.

materials or workmanship, Discovery Telecom will replace it free of charge. This

«
1
2
3
4
5
...
»

Содержание DTT PRI GSM CDMA Ingate


























































Отзывы:

Нет отзывов