PAGE 28 — MRH601DS VIBRATORY ROLLER • OPERATION MANUAL — REV. #1 (06/10/20)
MAINTENANCE
MACHINE MAINTENANCE
1. At the end of each day’s operation, wash dust and
dirt off the machine. Clean area around drums and
scrapers making sure all mud is removed.
Figure 30. Air Breather Location
2. Drain water tank completely. Wash and clean inside
the tank if it is dirty.
3. Cover the machine to prevent dust and store in a dry
place away from sun exposure and high humidity.
NOTICE
When using a high pressure water sprayer, be careful
not to let water enter the engine from the engine muffler
and air cleaner.
If water enters the engine cylinder, water hammer effect
might occur. See Water Hammer Effect Information
section for explanation.
An air breather is equipped with the oil tank (Figure 30).
A cover is provided to prevent entry of water into the oil
tank. Be careful not to let the cover fall off when cleaning
with a high pressure water sprayer.
OIL TANK
AIR BREATHER
LONG TERM STORAGE
1. Conduct thorough lubrication and oil change.
2. Disconnect battery terminals and dismount battery
from machine. Store battery.
3. If there is a possibility that ambient temperature will
drop below freezing point, add antifreeze agent to
coolant.
4. Cover the inlet and outlet of air cleaner and muffler
securely.
5. Store machine indoors. Do not leave outdoors.
WATER HAMMER EFFECT INFORMATION
When water enters inside the diesel engine cylinder, and
because water cannot be compressed like air, shock and
high water pressure occur inside the cylinder. This causes
damage to the parts inside the engine. This phenomenon
is called water hammer effect.
To
order
go
to
Discount-Equipment.com