PAGE 22 — MRH601DS VIBRATORY ROLLER • OPERATION MANUAL — REV. #1 (06/10/20)
SPRINKLING
3. Open the water cocks for the front and rear drums, to
start sprinkling. (Figure 18).
Figure 18. Water Cocks
DEADMAN DEVICE
The deadman device prevents accidental traveling in
reverse. It automatically returns the travel lever to the
neutral position by stopping the machine when the
deadman device is pressed forward (Figure 19).
Figure 19. Deadman Device
SPRINKLER COCK
Front Drum
SPRINKLER COCK
Rear Drum
N
E
P
O
N
E
P
O
CLOSE
CLOSE
“PRESS”
STOP(NEUTRAL)
REVERSE
DEADMAN
DEVICE
TRAVEL
LEVER
CAUTION
Except for switching operation between forward,
reverse and neutral, keep your hands off the travel lever.
Deadman device might not work properly if your hand
is on the travel lever and you are caught between the
machine and some other object.
OPERATION
STOPPING
1. With the vibration switch in the off position, return the
travel lever to the stop (neutral) position. Move the
throttle lever to the stop position after making sure
vibration has stopped.
2. Return the key switch to the stop position as soon as
the engine stops.
3. After the engine stops, close the fuel cock.
4. Lock the parking brake (Figure 20).
Figure 20. Parking Brake (Lock)
CAUTION
Neglecting to return the key switch to the stop position
will cause the battery to discharge.
REAR WHEEL DRUM
LOCK
RELEASE
PARKING BRAKE
NOTICE
When leaving the machine, use the wheel stopper and
remove the key. Never park or stop on a slope.
NOTICE
Parking brake system should always be kept clean to
avoid mud deposits.
To
order
go
to
Discount-Equipment.com
