Module Pairing
Pairing varies among devices but basic steps are the same. This process is done
upon initial install and will not have to be repeated.
1.
Turn ignition and r
adio “ON”
LED inside module will flash rapidly (pairing mode)
2.
On A2DP device: go to
Bluetooth Settings
3.
Select
Bluetooth
and enable it
4.
Tap
Scan for devices
.
5.
Wait for Bluetooth device name (See
Fig. 20
) to appear and tap it.
Once
paired confirmation tone is heard on car speakers
Fig. 20
Warning
:
Caller ID, ID3 tags etc., are
not shown on radio display
. Operate
Bluetooth device via wireless remote control, VR (voice recognition) or
smartphone built-in controls. Radio buttons can be used to adjust playback
level
Operation
1.
Turn ignition and r
adio “ON”
2.
Press “BAND” or “XM” button on radio.
3.
Launch Smartphone or tablet music streaming application
4.
Ensure audio device volume is set to 80% or more.
5.
Place call. Press
Pause/Play
to answer/end call.
6.
If correct operation is confirmed go ahead and reinstall radio.
If successful go ahead and reinstall radio
