Fig. 16
Flush mounted to dash
4.
Tuck and secure any extra wire from moving parts and test operation
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of module and
mount USB support bracket (See
Fig. 17
) to surface using
adhesive/tape or screws (included).
Fig. 17
USB mounting bracket
2.
Insert male terminal through hole in bracket (See
Fig. 18
) and connect
to module USB port (See
Fig. 14
)
Fig. 18
3.
Snap USB head (See
Fig. 18
) to bracket until flush (See
Fig. 19
)
Fig. 19
4.
Connect/tap
YELLOW
wire to accessory or battery supply. Your choice!
Accessory connection
: charging is possible with ignition/engine “ON”.
Battery connection
: charging is possible at all times.
Verify
BLUE
LED is lit.
5.
Tuck and secure any extra wire away from moving parts and test operation
(
See Bluetooth Pairing and Connection
)
