Fig. 7
8.
Locate 12V accessory at vehicles cigar lighter, fuse box, ignition cluster
etc.)
Warning:
Extension (
Fig. 7
) must be connected to a
switched/accessory supply source, not constant battery supply.
Vehicles with Active XM subscription go to step 11
9.
Connect supplied 3.5mm audio cable (See
Fig. 8
) to module
“AUX” jack
(See
Fig. 9
). Route other end to front of the dash or wherever Aux
device will reside (within 3 ft.)
Fig. 8
Aux cable
Fig.9
Module
10.
Install microphone (See
Fig. 10
) to vehicles visor or headliner using
included visor clip (See
Fig. 11
).
Fig. 10
Microphone
Fig. 11
Visor clip
11.
Carefully route microphone wire down side pillar and behind dash into
radio cavity.
12.
Connect microphone plug
module “MIC” input (See
Fig. 9
)
Exercise caution when routing microphone so to not damage the cable
and ensure no ventilation ducts are pointed towards microphone.
