Fig. 3
Radio 16-pin connector
4.
Disconnect factory 16-pin XM plug (See
Fig. 4
) from radio (See
Fig. 3
).
To disconnect, pull back
BLUE
locking tab, press
BLACK
tab, gasp and
pull plug from radio. (See
Fig. 4
)
Fig. 4
16-pin plug
Warning
:
To avoid connecting errors, all 16-pin connectors are
“keyed”
.
The 16-pin plug (See
Fig. 4
) included in this kit is
“Keyed”
and will only fit
the radio XM port (See
Fig. 3
)
Avoid pulling on wired. Grasp plug to remove.
5.
Connect factory 16-pin plug to harness 16-pin connector (See
Fig. 5
)
Fig. 5
16-pin connector
6.
Connect harness 16-pin plug to radio chamber vacated in step 4
7.
Secure
BLACK (ground) wire
to vehicle chassis or remove radio
chassis screw and secure ground wire to radio as seen in
Fig. 6
Fig. 6
Warning for vehicles with Bose amplifier:
The radio provides module
with 12V accessory power. If vehicle has a Bose amplifier; the radio does
not supply enough current to power module and turn on factory amp.
(Module play will be distorted or intermittent). If this should happen
please disconnect red wire from harness, connect to extension cable
included in kit (See
Fig. 7
) then connect extension to alternate 12V
accessory source in vehicle (e.g. Fuse box, cigar lighter etc.)
