Disaster Area Designs DMC-6 Gen3, Руководство пользователя

Страница: 11 / 20

of 11 20
8. Saving a Preset
1. Use Device Mode to select the programs and set the bypass state for each of your connected devices.
2. Hold the SAVE / UP button to begin the save process.
3. Tap the SAVE / UP or TAP / DOWN buttons to select the desired preset bank.
4. Tap the A, B, C, or D buttons to select the desired preset.
5. Hold the SAVE / UP button to save the preset to the selected location.
(Optional) If Preset Names are selected in the DMC Gen3 Setup
6. Tap the C or D buttons to move to the previous / next letter in the preset name. 8 letters are available for each preset.
7. Tap the A or B buttons to change the currently selected character in the preset name.
8. Hold the SAVE / UP button again to save the name and the preset.
Preset Mode Tips:
You may cancel a preset save at any time by holding the A, B, C, or D buttons.
The “bypass” / zero preset is a special case. If you press the button of the currently loaded preset while in Preset Mode, the
DMC Gen3 will bypass by loading the zero preset. If you would like to use the zero preset as a “favorite” sound, you can overwrite the
default values just like any other preset. Edit the preset like normal, but when you enter the preset save process, tap any of the preset
select buttons twice to load and then unload the preset location. The preset bank number will be displayed, but no preset (example
P00 if you are in bank 0.) If you save the preset with only the bank number showing, the DMC Gen3 will save the current programs and
bypass state to the zero preset.
Disaster Area Designs DMC-6 / DMC-8 Gen3
TAP TO SELECT PRESET
HOLD TO CANCEL
TAP FOR PREV / NEXT CHAR
HOLD TO DECREASE BANK
TAP TO SELECT PRESET
HOLD TO CANCEL
TAP FOR PREV / NEXT NAME
TAP TO INCREASE BANK
HOLD TO SAVE TO PRESET