Danish Interpretation Systems
User Manual
Manual 01 10 04479
10
In this situation the level of the DM/CM 4000 units
connected to the Delegate Microphones connector
is adjusted with the Microphone Volume control,
and the level of the wireless microphone connected
to the Input connector is adjusted with the Input
Volume control.
CU 4010 set-up with external mixer
In this set-up an external PA system is connected
along with some auxiliary microphones. Since only
one input connector is available on the CU 4005
/CU 4010 unit, it will be necessary to make use of
an external mixer.
The extra microphones as well as the output signal
from the CU 4005/CU 4010 are connected to the
inputs of the mixer. The mixer outputs are
connected to the PA system and the CU 4005/CU
4010 input respectively. The Microphone Volume
control of the CU 4005/CU 4010 must be muted
totally in this situation, since the mix of all signals
is now done at the external mixer.
A set up with an external equaliser for sound
equalisation of the built-in loudspeakers is possible
by connection of the equaliser in a similar way.
Display function
The unit is switched on with the POWER (1)
switch. (Please refers to the “Front panel controls”
section). If more units are linked together for a
larger system, it is advised to have an external
common mains power switch for all central units.
After power ON the units are ready for operation
after 20-30 seconds. The time is used for finding
the number of central and microphone units, and
setting up the system. It takes less time next time
the same set-up is switched on. The LCD-display
(6) will show:
CU Initializing 1.0
Menu:
INITIALIZING
If more central units or microphone controllers are
linked together, and one or more units are not
switched on, the display can look like this:
CU Initializing 1.0
Menu:
Unit:4 NOT Powered
INITIALIZING
or
CU Initializing 1.0
Menu:
Previous NOT Powered
INITIALIZING
1.0 indicates that the software is version 1.0.
Note:
