26
2 Unpacking and connecting
4.
Push the floor nozzle with the jointed
connection(Fig. 4/1) onto the lower end of the extension
tube (Fig. 4/2).
5.
Push the accessories mount (Fig. 5/1) onto one of the
extension tubes (Fig. 5/2). Then push both round brush-
es (Fig. 5/3-4) and the jet nozzle (Fig. 5/5) on to the ac-
cessories mount.
Your steam cleaner is now ready to use.
2.3
Using the accessories
Together with the floor nozzle just installed, you can ex-
pand the range of functions of your steam cleaner with oth-
er nozzles. If necessary, you can also vary the number of
extension tubes used.
The following accessories are included in the scope of de-
livery:
-
Jet nozzle (Fig. 1/4)
Use this to clean hard-to-reach places.
-
Nylon brush (Fig. 1/5)
Use this to intensively clean sensitive surfaces and to
clean stubborn dirt marks on carpets.
-
Brass brush (Fig. 1/6)
Use this to intensively clean non-sensitive, and
scratch resistant surfaces.
-
Window wiper (Fig. 1/28)
Use this like a wiper (from above to below) for clean-
ing glass and other smooth surfaces.
-
Cleaning cloth (Fig. 6)
Use the cleaning cloth together with the floor nozzle
to clean smooth surfaces. Secure the cleaning coth
(Fig. 6/1) to the floor nozzle using the clamps
(Fig. 6/2).
Fig. 4
2
1
Fig. 5
2
1
4
3
5
Fig. 6
2
1
2
02Vaporflex_gb.book Seite 26 Freitag, 30. April 2010 1:16 13
