25
2 Unpacking and connecting
GB
2
Unpacking and connecting
2.1
Unpacking
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery,
Z
Page 20, "An overview of your Vapor-
flex"
.
2.2
Assembly
1.
Insert the handle (Fig. 2/1) and the extension tubes
(Fig. 2/2) into each other. The locking catch clicks audi-
bly into place.
2.
Insert the jointed connection (Fig. 3/1), as shown, into
the floor nozzle (Fig. 3/2).
3.
Turn it 180° to lock it. It is now securely connected to the
floor nozzle.
ATTENTION:
Always transport/send the appliance in its original pack-
aging so that it does not become damaged. Keep the
packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then con-
tact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket and the accessory parts have cooled
down.
NOTE:
You can take the tubes apart. To do this, press the
release button (Fig. 2/3) and pull the tubes apart.
NOTE:
To loosen it, turn the jointed connection again by 180°.
Fig. 2
2
1
3
2
Fig. 3
2
1
2
1
02Vaporflex_gb.book Seite 25 Freitag, 30. April 2010 1:16 13
