29
Maintenance
GB
4
Maintenance
4.1
Emptying the dust con-
tainer
Empty the dust container when the red warning light
goes on (Fig. 15) or when the MAX mark has been reached
(Fig. 16/2).
1.
Unlatch the hose by the release catch (Fig. 16/1) and
detach the hose.
2.
Remove the dust container by unlocking it (Fig. 17/1.)
and then folding it down (Fig. 17/2.).
3.
Empty the dust container
either
by opening the bottom plate (Fig. 18):
- Hold the container low over a dustbin before doing this.
- Unlock the bottom plate (Fig. 18).
or
or by removing the cyclone unit (Fig. 19):
- Unlock the cyclone unit as shown (Fig. 19/1.).
- Detach the container from the cyclone unit (Fig. 19/2.).
- Empty the container into a dustbin.
ATTENTION:
Before emptying the dust container switch off the appli-
ance and observe the notices under
Z
Chapter 3.2,
"Switching off and retracting power cord"
. In this way you
avoid dust destroying the appliance.
NOTE:
Be careful when removing the dust container so that no
dust escapes.
NOTE:
You can dispose of the contents of the dust container
with your regular domestic trash if it contains no waste
materials prohibited in domestic trash.
15
16
17
18
19
02_Twinfinity_gb.book Seite 29 Dienstag, 2. August 2011 7:29 19
Содержание twinfinity m5040
Страница 3: ...3 D 1 ...