12
3 Before use
3
Before use
3.1
Unpacking
1.
Unpack the appliance and all its accessories.
2.
Check that the contents are intact (Fig. 1).
3.2
Assembly
*optional
(*i.e. in the scope of delivery depending on model and features)
1.
Powerfully insert the suction hose adapter into the suction hose recep-
tacle (Fig. 2/A). Push until you can hear and feel the releases catches
on the adapter snap into place (Fig. 2/B) and the adapter cannot be in-
serted any further.
2.
Attach the tube to the handle (Fig. 3/A).
If the two plastic insert tubes (Fig. 1/22*, optional*) were included in the
scope of delivery, connect them now.
If the telescopic tube (Fig. 1/21*, optional*) was included in the scope
of delivery, now set it to the required length (Fig. 3/B).
If the telescopic tube is still not long enough when fully extended and if
the metal telescopic tube extension (Fig. 1/23*, optional*) was included
in the scope of delivery, you can use it to extend the telescopic tube fur-
ther.
3.
Select the nozzle according to the surface to be cleaned:
Included
in the scope of delivery
:
-
Floor nozzle (Fig. 4/1):
It can be used everywhere and, thanks to its
switch, can be used equally well on carpets and hard floors.
Optionally available*
(*i.e. included in the scope of delivery depending
on model and features) are also:
-
Parquet brush (Fig. 4/2*):
Its long bristles make it especially suitable
for cleaning delicate surfaces (e. g. parquet and laminate floors).
-
Turbo brush (Fig. 4/3*):
this is used to vacuum
non-sensitive
car-
pets, runners, mats, and the like
-
Crevice nozzle (Fig. 5/1*):
Use this to vacuum dust from hard-to-
reach places.
-
Furniture brush (Fig. 5/2*):
Use this to vacuum dust off objects that
have sensitive surfaces.
-
Upholstery nozzle (Fig. 5/3*):
Use this to clean soft, scratch-resist-
ant surfaces (e.g. upholstered furniture).
-
Mini turbo brush (Fig. 5/4*):
this is used to vacuum
non-sensitive
upholstery, runners, mats, and the like
4.
Push the selected nozzle onto the lower end of the tube (Fig. 4). You
can put the small nozzles directly onto the handle (Fig. 5).
5.
Keep the other nozzles safe and inaccessible to children.
4
Use
ATTENTION:
Always transport or ship the appliance in its original packaging to avoid
damage. Keep the packaging for such an event. However, dispose of
no-longer-needed packaging material properly.
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
click!
click!
click!
B
click!
click!
click!
2
B
A
3
1
3
2
*
*
4
1
2
3
4
*
*
*
*
5
WARNING:
Danger of injury! Only attach the nozzles if the appliance is not con-
nected to the power supply. The cylinder vacuum cleaner could be
switched on by accident.
ATTENTION:
Before vacuuming, make sure that the fitted nozzle suits the surface to
be cleaned. Also observe the flooring manufacturer's recommendations.
ATTENTION:
Our (mini) turbo brush can only be used to vacuum surfaces that
are
not
sensitive.
Do not clean any floors or objects with the (mini)
turbo brush that you would not clean without a second thought with a
conventional brush. Therefore, do not clean sensitive or polished floor
surfaces with the (mini) turbo brush. Nor should you clean furniture, sen-
sitive carpets, upholstery, covers, or any material with a sensitive texture
with the (mini) turbo brush. If in doubt, refrain from using the (mini) turbo
brush. In every instance, observe the instructions for care and cleaning
of the respective manufacturer.
Paroly.book Seite 12 Montag, 15. August 2011 5:58 17
