FILTER REMOVAL & REPLACEMENT: CONTINUED
EXHAUST FILTER
Located on the side of the cleaner.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING:
UNPLUG CLEANER BEFORE CHANGING FILTER.
NOTE:
Filter should be cleaned as needed.
For Exhaust filter replacements, please visit our website at www.dirtdevil.com to buy online
or call customer service at 1-800-321-1134.
9
Pivot filter cage away
from body of cleaner then
remove.
Grasp HEPA filter cartridge
and remove.
1.
2.
3.
Remove screw from filter
cage.
Return filter cage to
cleaner by inserting tabs
on corners of filter cage
into slots on side of the
cleaner. Rotate back into
place and secure with the
one screw.
Return HEPA filter cartridge
to cleaner.
Tap the filter on the inside
of a garbage can to remove
excess dust and dirt. DO
NOT APPLY WATER TO
PLEATED FILTER!
6.
5.
4.
10
Secure by aligning
the three (3) tabs
in the base slots.
To reattach nozzle
guard, rotate/pivot
back into position.
3.
4.
Replace all four (4)
screws to secure nozzle
guard.
NOTE:
Make sure
bumper is secure before
replacing screws.
Slide belt onto
motorshaft. Place
new belt in area
of brushroll without
bristles (see inset).
1.
TO REPLACE NEW BELT
Motor
Shaft
With new belt in place,
pull and slide brushroll
into nozzle making sure
that the brushroll end
caps are in the correct
orientation (see inset).
Rotate brushroll manually
to make sure belt is
properly aligned.
2.
BELT OR BRUSHROLL: REMOVAL & REPLACEMENT
5
BELT STYLE
For Belt Style 5 replacements, please visit our website at www.dirtdevil.com to buy
online or call customer service at 1-800-321-1134.
Lay cleaner flat and flip cleaner to expose
nozzle base. Base should lay flat and
face up. To remove nozzle guard, use
Phillips screwdriver to remove the four (4)
screws. Arrows show location of screws.
Rotate/pivot the nozzle guard
and pull off.
2.
1.
TO REMOVE OLD BELT
Lift and remove brushroll.
Dispose of old belt.
3.
TOOL REQUIRED: PHILLIPS OR FLATHEAD SCREWDRIVER
WARNING:
TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE SERVICING.
