Dirt Devil Infinity MCC, Руководство по эксплуатации

Страница: 24 / 36

24
2 Unpacking and connecting
2 Unpacking and connecting
2.1 Unpacking
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery
Z Page 20, "An overview of your Infinity
MCC" .
2.2 Assembly
1. Plug the suction hose adapter (Fig. 2/1) into the suction
hose receiver (Fig. 2/2) and lock the adapter by turning
it clockwise to the stop point.
2. Push the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig. 3/2).
3. Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) forwards
(Fig. 4/a). Then pull the telescopic tube by the handle to
the desired length (Fig. 4/b). To lock it, release the
telescopic tube lock while you pull. You will hear an
audible click.
Your cylinder vacuum cleaner is now ready to use.
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. It could be switched on by accident.
NOTE:
It may be necessary to push a bit harder.
Fig. 2
1 2
Fig. 3
3
4
2
1
Fig. 4
1
a
b
02Trimaxx gb.book Seite 24 Mittwoch, 7. März 2007 7:24 19