22
2 Unpacking and connecting
2
Unpacking and connecting
2.1
Unpacking
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding the
scope of delivery,
Z
Page 18, "An overview of your
Centrino"
.
2.2
Assembly
1.
Push the end of the suction hose (Fig. 2/1) into the
connection point (Fig. 2/2) of the cylinder vacuum
cleaner until the lock audibly clicks into place. Make
sure that the release button (Fig. 2/3) points up.
2.
Push the handle (Fig. 3/1) into the upper end of the
telescopic tube (Fig. 3/2).
3.
Push the floor nozzle (Fig. 3/3) onto the lower end of the
telescopic tube (Fig. 3/4).
4.
Push the accessories mount (Fig. 4/1) onto the handle
(Fig. 4/2). Then push the furniture brush (Fig. 4/3) and
crevice nozzle (Fig. 4/4) on to the holders for these.
ATTENTION:
Always transport/send the appliance in its original
packaging so that it does not become damaged. Keep
the packing material for this purpose.
Dispose of any packing material that is no longer
required in accordance with the provisions applicable in
your country.
NOTE:
If you should notice damage due to transport, then
contact your dealer immediately.
WARNING:
Only assemble the appliance if the plug has been pulled
out of the socket. It could be switched on by accident.
NOTE:
It may be necessary to push a bit harder.
NOTE:
If necessary, you can also attach the accessories mount
to the telescopic tube.
Fig.2
2
1
3
Fig.3
3
4
1
2
Fig.4
3
2
4
1
02_Centrino_gb.book Seite 22 Montag, 28. Juli 2008 2:49 14
