23
2 Unpacking and connecting
GB
5.
Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 5/1) forwards
(Fig. 5/a). Then pull the telescopic tube by the handle
(Fig. 1/1) to the desired length (Fig. 5/b). To lock it,
release the telescopic tube lock when you let go. You
will hear an audible click.
Your cylinder vacuum cleaner is now ready to use.
2.3
Using other nozzles
(accessories)
Together with the floor nozzle just installed, you can
expand the range of functions of your cyclinder vacuum
cleaner with other nozzles.
The crevice nozzle and the furniture brush are included
as
accessories
in the scope of delivery. They can be
secured to the accessories mount (Fig. 4/1).
-
Crevice nozzle (Fig. 6/1)
Use this to vacuum dust from hard to reach places.
-
Furniture brush (Fig. 6/2)
Use this to vacuum dust off objects that have
sensitive surfaces (e.g. cupboards, doors).
Also available as an
option
are the following:
-
Turbo brush (Fig. 7)
This has a rotating brush head and is therefore most
suitable for deep-cleaning carpets. Brushing also
causes the carpet pile to straighten up.
-
Parquet brush (Fig. 8)
This is equipped with long bristles and is used for
vacuuming particularly sensitive surfaces (e.g.
parquet, laminate flooring).
Proceed as follows to attach the nozzles:
1.
Switch the appliance off and pull the plug out of the
socket.
2.
Remove the nozzle from the telescopic tube (Fig. 9/1).
3.
Push the desired nozzle onto the lower end of the
telescopic tube (Fig. 9).
4.
Secure the nozzles no longer required in the
accessories mount, as far as this is possible. Keep the
other nozzles safe and inaccessible to children.
Fig.5
1
b
a
NOTE:
When using the turbo brush, a loud noise can occur as a
result of the high speed of the brush. This is normal.
WARNING:
Only assemble the nozzles if the plug has been removed
from the socket. The cylinder vacuum cleaner could be
switched on by accident.
Fig.6
1
2
Fig.7
Fig.8
Fig.9
1
02_Centrino_gb.book Seite 23 Montag, 28. Juli 2008 2:49 14
