32
3 Preparing the appliance
3.4
Attaching the special nozzles
1.
Fit the pinpoint nozzle as described,
Z
Chapter 3.3, "Attaching the pinpoint
nozzle"
.
2.
If the cleaning effect of the jet of steam
alone is not sufficient for your cleaning
task, select a special nozzle.
The
wire brush (Fig. 9/A)
serves to re-
move stubborn dirt from very hard-wearing
surfaces.
The
plastic brush (Fig. 9/B)
serves to re-
move stubborn dirt from scratch-resistant sur-
faces.
The
crevice brush (Fig. 9/C)
works best
for removing dirt from between tiles and
grooves.
The
jet nozzle (Fig. 10/A)
is recommend-
ed if the jet of steam has to be very concen-
trated like for the pinpoint jet nozzle.
The
spatula attachment
(Fig. 10/B)
serves to scrape off dirt from scratch-resist-
ant, smooth surfaces.
The
2-in-1 combi attachment
(Fig. 11/A)
serves to scrape off glass surfaces to which
steam had previously been applied. Observe
the instructions under
Z
Chapter 4.3, "Steam-
cleaning glass surfaces"
for this.
The
2-in-1 combi attachment
(Fig. 11/B)
with cotton cover
serves to freshen up up-
holstery and clothes. Observe the instructions
under
Z
Chapter 4.4, "Refreshing upholstery
and clothing"
for this.
3.
Slide the respective special nozzle onto
the pinpoint jet nozzle.
4.
Fasten the respective special nozzle by
turning it 90° in the direction of the arrow.
NOTE:
All special nozzles can only be fitted onto
the previously mounted pinpoint nozzle. All
special nozzles are attached in the same
way.
A
B
C
90°
9
A
B
90°
10
A
B
90°
11
NOTE:
By turning is in the opposite direction you
can release the respective special nozzle
again.
M317.book Seite 32 Mittwoch, 30. März 2011 8:40 08
