DirekTronik ZeeVee ZyPerMX2, Руководство пользователя

Страница: 15 / 45

11
Basic Operation
4.
Select
HLS
for the stream type from the Transport drop-down list.
5.
Enter a Program number for each stream in the
Prog #
field.
6.
Enter a description of the content in the
Name
field.The name field cannot exceed 7 charac
-
ters. Spaces are
not allowed in the The Name
field as it is used as part of the Address for
HLS streaming. See following section.
7. Click the Apply button to save the changes or click the Reset button to discard any
changes.
Note:
Any input to the ZyPerMX4 or ZyPerMX2 can be configured to simultaneously output
both a multicast and HLS stream. Select either “UDP+HLS” or “RTP+HLS” in step 4 above.
Be sure to set the IP Multicast address and Port Number as described on previous pages.