DIRECTTECH Crystal D1000, Руководство пользователя

Страница: 64 / 68

64
InSTAllATIon InSTRuCTIonS
(WITH 2 PERSONS)
foR DIRECTTECH CRYSTAl & DIRECTTECH mIRRoR wITH 30°-BRACkET
Delivery contents:
• 1 piece DIRECTTECH heating panel
• 2 pieces wall brackets
• 4 pieces threaded bolts M8
• 4 pieces hexagon nuts M8
Additional accessories:
(not included in delivery)
• hexagonal key
• in accordance with local conditions appropriate mounting
material
Installation:
1. Lay down the DIRECTTECH heating panel carefully with the glass
side on a horizontal surface (use the paperboard as supporting
underlay).
2. Place the supplied brackets on the back of the frame profile where
the square nuts are located for screwing.
3. Now screw the threaded bolts through the brackets into the
appropriate square nuts with clearance of 300mm (see pic.1) from
bracket to the outside of the frame. Then tighten the threaded
bolts (due to mechanical manufacturing, deviations of drilling
distances might occur!).
4. Secure the brackets with the supplied hexagon nuts.
5. Now you can align the DIRECTTECH heating panel on the wall
with the screwed on brackets (pic.2) and take over the drilling
holes for screwing (due to mechanical manufacturing, deviations
of drilling distances might occur!).
6. Fasten the wall brackets with appropriate fastening material
regarding the mounting surface.
7. For electric installations, the regulations of EN/VDE and of the
local power supply company (EVU) are decisive.
Dismantling:
1. Disconnect the electrical connections according to safety instruc-
tions and technical rules.
2. The dismantling takes place in reverse sequence.