DIRECTTECH Crystal D1000, Руководство пользователя

Страница: 58 / 68

58
!
Delivery contents:
• 1 piece DIRECTTECH heating panel (marble stone)
• 2 pieces wall brackets (pre-assembled)
• 2 pieces spacers (pre-assembled)
Additional accessories:
(not included in delivery)
• in accordance with local conditions appropriate mounting
material
• 1 piece Allen key 4 mm
The DIRECTTECH STONE heating panels can be installed
vertically as well as horizontally. Depending on the desired
type of installation, you have to exchange the positions of the
pre-assembled wall brackets and spacers on the back side of
the DIRECTTECH heating panel. What you have to do is to
loosen the nuts with which the brackets are fastened on the
back side of the DIRECTTECH heating panel and twist off the
spacers from the grub screws which extend out of the back
side of the panel.
After completing the exchange of the positions, please ensure
yourself that you tighten all loosened nuts again before you
start the installation.
InSTAllATIon InSTRuCTIonS
foR DIRECTTECH STonE
(Installation only with two people / a ceiling installation is not allowed)
Installation:
1. Bolt the wall brackets to the wall parallel to each other, with ap-
propriate screws and wall plugs for the mounting surface. Please
take care of the installation distance “A” described in the installa-
tion instructions on the following pages. For vertical installations
the installation distance “B” is decisive, also described on the
following pages.
2. The electrical connections must be made according to the safety
instructions and the technical rules. For electric installation works
the regulations of EN/VDE and of the local power supply company
(EVU) are decisive.
3. After fastening the wall brackets you can now hook in the
DIRECTTECH heating panel. Attention: only with two people!!!
4. To adjust and move the panel please use two adjusting screws
according to the drawings which are changeable in height by
using the Allen key.
Dismantling:
1. Disconnect the electrical connections according to the safety
instructions and technical rules.
2. Lift the DIRECTTECH heating panel out of the wall brackets.
Attention: only with two people!!!
3. Place the DIRECTTECH heating panel carefully on its backside to
prevent damages on the marble stone.
The installation site must provide a sufficient carrying capacity and strength in accordance
with the weight of the product. Please hereto consult your ceiling installer/architect.