8
© 2012 Directed. All rights reserved.
GL Installation
1. Remove driver’s rear door sill.
2. Fold driver’s middle row seat all the way forward.
3. Remove torx bolt holding seat belt to rear side panel.
4. Pull back weather strip on the back side of the rear door opening.
5. Remove (1) T-30 torx from inside the rear retractible cover mount.
6. Pop side panel partially out.
7. Route the 166 KG adapter to the rear side panel area.
8. Reach in and unplug connector on KG module (see picture).
9. Remove the shroud from that connector
10. Remove the brown and brown/red pins from the black connector making a note of their position
11. Install the pins from the 166 KG adapter into the spots where the factory wires were removed.
12. Reinstall the shroud for that plug.
13. Reinstall the plug into the module.
14. Pop the side panel back into place.
15. Reinstall (1) T-30 Torx and cosmetic cover.
16. Reinstall Torx bolt for seat belt.
17. Reinstall driver’s rear door sill panel.
Installation - GL
1.
Remove driver’s rear door sill.
2.
Fold driver’s middle row seat all the way forward.
3.
Remove torx bolt holding seat belt to rear side panel.
4.
Pull back weather strip on the back side of the rear door opening.
5.
Remove (1) T-30 torx from inside the rear retractible cover mount.
6.
Pop side panel partially out.
7.
Route the 166 KG adapter to the rear side panel area.
8.
Reach in and unplug connector on KG module (see picture).
9.
Remove the shroud from that connector
10.
Remove the brown and brown/red pins from the black connector making a note of their position
11.
Install the pins from the 166 KG adapter into the spots where the factory wires were removed.
12.
Reinstall the shroud for that plug.
13.
Reinstall the plug into the module.
14.
Pop the side panel back into place.
15.
Reinstall (1) T-30 Torx and cosmetic cover.
16.
Reinstall Torx bolt for seat belt.
17.
Reinstall driver’s rear door sill panel.
Remove door sill
"
"
"
"
"
"
Remove seat belt
Installation - GL
1.
Remove driver’s rear door sill.
2.
Fold driver’s middle row seat all the way forward.
3.
Remove torx bolt holding seat belt to rear side panel.
4.
Pull back weather strip on the back side of the rear door opening.
5.
Remove (1) T-30 torx from inside the rear retractible cover mount.
6.
Pop side panel partially out.
7.
Route the 166 KG adapter to the rear side panel area.
8.
Reach in and unplug connector on KG module (see picture).
9.
Remove the shroud from that connector
10.
Remove the brown and brown/red pins from the black connector making a note of their position
11.
Install the pins from the 166 KG adapter into the spots where the factory wires were removed.
12.
Reinstall the shroud for that plug.
13.
Reinstall the plug into the module.
14.
Pop the side panel back into place.
15.
Reinstall (1) T-30 Torx and cosmetic cover.
16.
Reinstall Torx bolt for seat belt.
17.
Reinstall driver’s rear door sill panel.
Remove door sill
"
"
"
"
"
"
Remove seat belt
Remove door sill
Remove seat belt
Remove screw cover
" "
"
"
"
"
Remove T-30
Pull back weather strip
"
"
"
"
"
Pop out side panel
remove white plug
" "
"
"
"
"
plug removed
KG module under bracket
remove white plug
Remove screw cover
" "
"
"
"
"
Remove T-30
Pull back weather strip
"
"
"
"
"
Pop out side panel
remove white plug
" "
"
"
"
"
plug removed
KG module under bracket
remove white plug
Remove screw cover
Remove T-30
