Platform: DBALL2
Firmware: CHRYSLER Remote Start Ready (RSR) Installation
© 2016 Directed. All rights reserved.
Rev.: 20160908
Installation Type 1b (without T-Harness)
Page 4
Important!
The Hood Pin and Remote Start Safety Override Switch are mandatory safety devices, but are NOT supplied with the DBALL.
10
DBALL2
RF
Prog. Button
LED
4
14
12
2
RAP Off:
Yellow/Black:
10
[1]
Parking Lights MUX Output:
Violet/Green:
8
[1]
Parking Lights MUX Output:
Violet/Brown:
9
(-) Driver door Trigger
Violet wire in
driver kick panel
TX
(-) Ground
RX
(+) 12V
Ignition
Barrel
1
6
12
7
Connector side view
at ignition switch
[1]
(-) Parking Lights via Relay:
Green/Black:
2
HS CAN High:
Tan/Black:
3
HS CAN Low:
Tan:
4
Ignition Isolation (veh. side):
Yellow:
8
Ignition Isolation (conn. side):
Orange/Yellow:
9
(+) 12V:
Brown:
7
(-) Ground:
Black:
14
(+) 12V:
Red:
13
6:
White/Black:
(-) Hood
Hood Pin
Remote Start Safety
Override Switch
You can connect to either a XL202
RFTD
OR
a SmartStart module.
Refer to the
SmartStart/XL202
Installation Notes
for more information.
With the exception of the OBDII Diagnostic connector, all adapters are displayed from the wire side (unless specified otherwise).
[1]
See Parking Lights wiring reference chart for the appropriate Parking Lights configuration.
(+) Ignition:
Pink/White,
pin 3
(+) 12V:
Lt.Blue/Red
,pin 1
(-) Ground:
Black/Striped,
pin 4
H
S
C
A
N
High: pin 5
H
S
C
A
N
Low: pin 6
See page 5 for
wiring information
OR
30
86
85
87
87a
To vehicle’s
(+) Parking Lights
White/Violet
Fuse 15A
+12V
ONLY connect for
Dodge Journey.
This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode with or without a
Plug & Play (
CHTHD1
or
CHTHD2
) T-Harness (Optional). This solution offers three (3) configuration
options to control your system: 3x OEM Lock Remote Start Activation, RF Kit or SmartStart
(all sold separately).